Technical data

160 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide

5 Commands by Subsystem

Query Syntax :OPEE?

The :OPEE? query returns the current value contained in the Operation

Status Enable register as an integer number.

Return Format

<value> ::= integer in NR1 format.

See Also • "Introduction to Root (:) Commands" on page 138

• ":AER (Arm Event Register)" on page 139

• ":CHANnel<n>:PROTection" on page 218

• ":EXTernal:PROTection" on page 240

• ":OPERegister[:EVENt] (Operation Status Event Register)" on page 163

• ":OVLenable (Overload Event Enable Register)" on page 165

• ":OVLRegister (Overload Event Register)" on page 167

• "*STB (Read Status Byte)" on page 131

• "*SRE (Service Request Enable)" on page 129

5Wait

Trig

Wait Trig Event when the trigger is armed.

4 --- --- (Not used.)

3 Run Running Event when the oscilloscope is running (not

stopped).

2-0 --- --- (Not used.)

Table 48 Operation Status Enable Register (OPEE) (continued)

Bit Name Description When Set (1 = High = True), Enables: