User`s guide

Initial Setup 2
InfiniiVision Oscilloscopes User’s Guide 51
3 Press the power switch.
The power switch is located on the lower left corner of the front panel. Some front
panel lights will come on and the oscilloscope will be operational in a few seconds.
Charging the Battery
When charging the battery, the operating temperature should be in the range from 0C to
45C,  80% relative humidity.
1 Connect the supplied AC adapter to the back of the oscilloscope, and connect the
adapter’s power cord to a suitable AC voltage source.
Ground Post
CAUTION
AC adapter for battery-powered oscilloscopes: Use only the supplied adapter.
Damage to the equipment could result if an improper AC adapter is used.