User`s guide

10 Serial Decode/Lister
320 InfiniiVision Oscilloscopes User’s Guide
SPI Serial Decode
1 Select the SPI serial decode mode:
a Press the [Acquire] key.
b Press the Serial Decode softkey.
c In the Serial Decode Menu, press the Mode softkey.
d Use the Entry knob (or repeatedly press and release the Mode softkey) to select the
SPI serial decode mode.
NOTE
Because of oscilloscope hardware resource limitations, you cannot decode SPI data
while CAN or LIN triggering is selected.
NOTE
For SPI triggering setup see page 151.
Display
decode
Decode
mode
Signal
setup menu
Return to
previous menu
SPI word
size
Display
decode in
Lister