User`s guide

Serial Decode/Lister 10

InfiniiVision Oscilloscopes User’s Guide 301

c In the Serial Decode Menu, press the Mode softkey.

d Use the Entry knob (or repeatedly press and release the Mode softkey) to select the

FlexRay serial decode mode.

4 Ensure Decode is switched on. The VPT1000 must be connected and running in

asynchronous or synchronous mode for a meaningful display.

5 If the oscilloscope is stopped, press the [Run/Stop] key to acquire and decode data.

6 If decoded data does not appear, press the Settings softkey, then repeatedly press the

Mode softkey (in the VPT1000 Menu) to cycle through the modes and establish

synchronization.

You can use the Zoom horizontal sweep mode for easier navigation of the decoded data.

Display

decode

Decode

mode

VPT1000

Return to

previous menu

Reset

counters