User`s manual

Display characteristics

All 3000 X-Series models

Characteristics

Display 8.5-inch WVGA

Resolution 800 (H) x 480 (V) pixel format (screen area)

Graticules 8 vertical divisions by 10 horizontal divisions with intensity controls.

Format YT and XY

Maximum waveform update rate > 1,000,000 wfms/s

Persistence Off, infinite, variable persistence (100 ms - 60 s)

Intensity gradation 64 intensity levels

Input/output ports

All 3000 X-Series models

Port

USB 2.0 hi-speed host port Two USB 2.0 hi-speed host ports, front and real panel

Supports memory devices and printers

USB 2.0 hi-speed device port One USB 2.0 hi-speed device port on rear panel

LAN port 10/100Base-T (requires DSOXLAN module)

Video out port Connect oscilloscope display to an external monitor or projector (requires DSOXLAN module)

GPIB port To allow easy migration into existing test systems (requires DSOXGPIB)

Probe compensator output Square wave: 2.5 Vpp, 1 kHz

Kensington style lock Rear-panel security slot connects to standard Kensington-style lock

WaveGen out Front-Panel BNC Connector

Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget

Performance characteristics

WaveGen – Built-in function generator

Waveforms Sine, Square, Ramp, Pulse, DC, Noise, Sine Cardinal (Sinc), Exponential Rise, Exponential Fall,

Cardiac, Gaussian Pulse, and Arbitrary.

Sine • Frequency range: 0.1 Hz to 20 MHz

• Amplitude flatness: ±0.5 dB (relative to 1 kHz)

• Harmonic distortion: –40 dBc

• Spurious (non harmonics): –40 dBc

• Total harmonic distortion: 1%

• SNR (50 ohm load, 500 MHz BW) : 40 dB (Vpp > = 0.1 V); 30 dB (Vpp < 0.1V)

Square wave /pulse • Frequency range: 0.1 Hz to 10 MHz

• Duty cycle: 20 to 80%

• Duty cycle resolution: Larger of 1% or 10 ns

• Pulse width: 20 ns minimum

• Rise/fall time: 18 ns (10 to 90%)

• Pulse width resolution: 10 ns or 5 digits, whichever is larger

• Overshoot: < 2%

• Asymmetry (at 50% DC): ±1% ± 5 ns

• Jitter (TIE RMS): 500 ps