User`s manual

Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget

Performance characteristics

Horizontal system digital channels

All MSO models and DSO models with MSO upgrade

Characteristics

Maximum sample rate 1 GSa/s

Maximum record length 1 Mpts per channel standard (with digital channels only)

2 Mpts per channel with DSOX3MEMUP memory upgrade option(with digital channels only)

Minimum detectable pulse width 5 ns

Channel-to-channel skew 2 ns (typical); 3 ns (maximum)

Trigger system

All 3000 X-Series models

Characteristics

Trigger modes • Normal (triggered): requires trigger event for scope to trigger

• Auto: triggers automatically in absence of trigger event

• Single: triggers only once on a trigger event, press [Single] again for scope to find another

trigger event, or press [Run] to trigger continuously in either Auto or Normal mode

• Force: front panel button that forces a trigger

Trigger coupling DC: DC coupled trigger

AC: AC coupled trigger, cutoff frequency: < 10 Hz (internal); <50 Hz (external)

HF Reject: High frequency reject, cutoff frequency ~ 50 kHz

LF Reject: Low frequency reject, cutoff frequency ~ 50 kHz

Noise Reject: Selectable OFF or ON, decreases sensitivity 2x

Trigger holdoff range 40 ns to 10.00 s

Trigger sensitivity

Internal* <10 mV/div: greater of 1 div or 5 mV; ≥ 10 mV/div: 0.6 div

External* 200 mVpp from DC to 100 MHz

350 mVpp 100 MHz to 200 MHz

Trigger level range

Any channel ± 6 div from center screen

External ± 8 V

* Denotes warranted specifications, all others are typical.

Specifications are valid after a 30-minute warm-up period and ±10 °C from firmware calibration temperature.