Manualshelf

Technical data

ManualsBrandsAgilent Technologies ManualsPower ToolsInfiniiVision 3000 DSO-X 3054A
919293949596979899100
Table Of Contents
92 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
4 Commands Quick Reference
:SBUS<n>:CAN:TRIGger
<condition> (see
page 469)
:SBUS<n>:CAN:TRIGger?
(see page 470)
<condition> ::= {SOF | DATA |
ERRor | IDData | IDEither |
IDRemote | ALLerrors | OVERload |
ACKerror}
:SBUS<n>:CAN:TRIGger:
PATTern:DATA <string>
(see page 471)
:SBUS<n>:CAN:TRIGger:
PATTern:DATA? (see
page 471)
<string> ::= "nn...n" where n ::=
{0 | 1 | X | $}
<string ::= "0xnn...n" where n
::= {0,..,9 | A,..,F | X | $}
:SBUS<n>:CAN:TRIGger:
PATTern:DATA:LENGth
<length> (see
page 472)
:SBUS<n>:CAN:TRIGger:
PATTern:DATA:LENGth?
(see page 472)
<length> ::= integer from 1 to 8
in NR1 format
:SBUS<n>:CAN:TRIGger:
PATTern:ID <string>
(see page 473)
:SBUS<n>:CAN:TRIGger:
PATTern:ID? (see
page 473)
<string> ::= "nn...n" where n ::=
{0 | 1 | X | $}
<string ::= "0xnn...n" where n
::= {0,..,9 | A,..,F | X | $}
:SBUS<n>:CAN:TRIGger:
PATTern:ID:MODE
<value> (see
page 474)
:SBUS<n>:CAN:TRIGger:
PATTern:ID:MODE? (see
page 474)
<value> ::= {STANdard | EXTended}
Table 22 :SBUS<n>:CAN Commands Summary (continued)
Command Query Options and Query Returns
Table 23 :SBUS<n>:I2S Commands Summary
Command Query Options and Query Returns
:SBUS<n>:I2S:ALIGnmen
t <setting> (see
page 477)
:SBUS<n>:I2S:ALIGnmen
t? (see page 477)
<setting> ::= {I2S | LJ | RJ}
:SBUS<n>:I2S:BASE
<base> (see page 478)
:SBUS<n>:I2S:BASE?
(see page 478)
<base> ::= {DECimal | HEX}
:SBUS<n>:I2S:CLOCk:SL
OPe <slope> (see
page 479)
:SBUS<n>:I2S:CLOCk:SL
OPe? (see page 479)
<slope> ::= {NEGative | POSitive}
:SBUS<n>:I2S:RWIDth
<receiver> (see
page 480)
:SBUS<n>:I2S:RWIDth?
(see page 480)
<receiver> ::= 4-32 in NR1 format