Manualshelf

Technical data

ManualsBrandsAgilent Technologies ManualsPower ToolsInfiniiVision 3000 DSO-X 3054A
791792793794795796797798799800
Table Of Contents
Obsolete and Discontinued Commands 32
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 797
:MEASure:TSTArt
(see page 860)
Command Syntax
:MEASure:TSTArt <value> [suffix]
<value> ::= time at the start marker in seconds
[suffix] ::= {s | ms | us | ns | ps}
The :MEASure:TSTArt command moves the start marker (X1 cursor) to the
specified time with respect to the trigger time.
Query Syntax
:MEASure:TSTArt?
The :MEASure:TSTArt? query returns the time at the start marker (X1
cursor).
Return Format
<value><NL>
<value> ::= time at the start marker in NR3 format
See Also • "Introduction to :MARKer Commands" on page 310
• "Introduction to :MEASure Commands" on page 330
• ":MARKer:X1Position" on page 312
• ":MARKer:X2Position" on page 314
• ":MARKer:XDELta" on page 316
• ":MEASure:TDELta" on page 793
• ":MEASure:TSTOp" on page 798
NOTE
The short form of this command, TSTA, does not follow the defined Long Form to Short
Form Truncation Rules (see page 862). The normal short form "TST" would be the same for
both TSTArt and TSTOp, so sending TST for the TSTArt command produces an error.
NOTE
The :MEASure:TSTArt command is an obsolete command provided for compatibility to
previous oscilloscopes. Use the :MARKer:X1Position command (see page 312) instead.