Technical data

4 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
• Chapter 9, “:CALibrate Commands,” starting on page 211, describes
utility commands for determining the state of the calibration factor
protection button.
• Chapter 10, “:CHANnel<n> Commands,” starting on page 221, describes
commands that control all oscilloscope functions associated with
individual analog channels or groups of channels.
• Chapter 11, “:DEMO Commands,” starting on page 241, describes
commands that control the education kit (Option EDU) demonstration
signals that can be output on the oscilloscope's Demo 1 and Demo 2
terminals.
• Chapter 12, “:DIGital<d> Commands,” starting on page 247, describes
commands that control all oscilloscope functions associated with
individual digital channels.
• Chapter 13, “:DISPlay Commands,” starting on page 255, describes
commands that control how waveforms, graticule, and text are displayed
and written on the screen.
• Chapter 14, “:EXTernal Trigger Commands,” starting on page 263,
describes commands that control the input characteristics of the
external trigger input.
• Chapter 15, “:FUNCtion Commands,” starting on page 269, describes
commands that control math waveforms.
• Chapter 16, “:HARDcopy Commands,” starting on page 287, describes
commands that set and query the selection of hardcopy device and
formatting options.
• Chapter 17, “:LISTer Commands,” starting on page 305, describes
commands that turn on/off the Lister display for decoded serial data
and get the Lister data.
• Chapter 18, “:MARKer Commands,” starting on page 309, describes
commands that set and query the settings of X- axis markers (X1 and
X2 cursors) and the Y- axis markers (Y1 and Y2 cursors).
• Chapter 19, “:MEASure Commands,” starting on page 321, describes
commands that select automatic measurements (and control markers).
• Chapter 20, “:MTESt Commands,” starting on page 385, describes
commands that control the mask test features provided with
Option LMT.
• Chapter 21, “:POD Commands,” starting on page 419, describes
commands that control all oscilloscope functions associated with groups
of digital channels.
• Chapter 22, “:RECall Commands,” starting on page 425, describes
commands that recall previously saved oscilloscope setups, reference
waveforms, or masks.
• Chapter 23, “:SAVE Commands,” starting on page 433, describes
commands that save oscilloscope setups, screen images, and data.