Technical data

Table Of Contents
:MEASure Commands 19
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 377
:MEASure:VRATio
(see page 860)
Command Syntax
:MEASure:VRATio [<source1>][,<source2>]
<source1>, <source2> ::= {CHANnel<n> | FUNCtion | MATH | WMEMory<r>}
<n> ::= 1-2 or 1-4 (# of analog channels) in NR1 format
<r> ::= 1-2 in NR1 format
The :MEASure:VRATio command places the instrument in the continuous
measurement mode and starts a ratio measurement.
Query Syntax
:MEASure:VRATio? [<source1>][,<source2>]
The :MEASure:VRATio? query measures and returns the ratio of AC RMS
values of the specified sources expressed as dB.
Return Format
<value><NL>
<value> ::= the ratio value in dB in NR3 format
See Also "Introduction to :MEASure Commands" on page 330
":MEASure:VRMS" on page 378
":MEASure:SOURce" on page 362