Technical data

Table Of Contents
Commands Quick Reference 4
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 109
:TRIGger:MODE <mode>
(see page 648)
:TRIGger:MODE? (see
page 648)
<mode> ::= {EDGE | GLITch |
PATTern | TV | EBURst | RUNT |
SHOLd | TRANsition | SBUS{1 | 2}
| USB}
<return_value> ::= {<mode> |
<none>}
<none> ::= query returns "NONE"
if the :TIMebase:MODE is ROLL or
XY
:TRIGger:NREJect {{0
| OFF} | {1 | ON}}
(see page 649)
:TRIGger:NREJect?
(see page 649)
{0 | 1}
:TRIGger:SWEep
<sweep> (see
page 650)
:TRIGger:SWEep? (see
page 650)
<sweep> ::= {AUTO | NORMal}
Table 41 General :TRIGger Commands Summary (continued)
Command Query Options and Query Returns
Table 42 :TRIGger:EBURst Commands Summary
Command Query Options and Query Returns
:TRIGger:EBURst:COUNt
<count> (see
page 652)
:TRIGger:EBURst:COUNt
? (see page 652)
<count> ::= integer in NR1 format
:TRIGger:EBURst:IDLE
<time_value> (see
page 653)
:TRIGger:EBURst:IDLE?
(see page 653)
<time_value> ::= time in seconds
in NR3 format
:TRIGger:EBURst:SLOPe
<slope> (see
page 654)
:TRIGger:EBURst:SLOPe
? (see page 654)
<slope> ::= {NEGative | POSitive}
:TRIGger:EBURst:SOURc
e <source> (see
page 655)
:TRIGger:EBURst:SOURc
e? (see page 655)
<source> ::= {CHANnel<n> |
DIGital<d>}
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format