Specifications

04 | Keysight | InniiVision 3000T X-Series Oscilloscopes - Data Sheet

Discover: The industry’s fastest uncompromised

update rate increases the chance of nding anomalies

Industry-Leading Uncompromised Update Rate

If you can’t see the problem, you can’t x the problem. With an industry-leading update

rate of over one million waveforms per second, the InniiVision 3000T X-Series gives you

the highest probability of capturing random and infrequent events that you would miss

on an oscilloscope with a lower waveform update rate.

not only lets you see more waveforms, but it has the uncompromised ability to nd the

most difcult problems in your design under any conditions. Unlike other oscilloscopes,

uncompromised ability means:

– Always-fast, responsive operation

– No slowdown with logic channels on

– No slowdown with protocol decoding on

– No slowdown with math functions on

– No slowdown with measurements on

– No slowdown with vectors on

– No slowdown with sinx/x interpolation on

What is waveform update rate?

As oscilloscopes acquire data, process it, and plot it to the screen, there is inevitable

“dead time,” or the time oscilloscopes miss signals completely. In general, the faster the

waveform update rate, the shorter the dead time. The shorter the dead time, the more

likely an oscilloscope is to capture anomalies and infrequent events. This is why it is

important to select an oscilloscope with a fast waveform update rate. Figures 7 and 8

demonstrate the difference between a slower update rate and a faster update rate.

Figure 9: Other vendor’s oscilloscope with 50,000 waveforms/second. A long dead time decreases

your chances of capturing infrequent events.

Figure 10: InniiVision 30000T X-Series with 1,000,000 waveforms/second. A short dead time

increases your chancs of capturing infrequent events.