User`s guide

8 Agilent Infiniium 90000 X-Series Oscilloscopes User’s Guide
2 Using the Oscilloscope
Front Panel Inputs and Outputs 26
Channel Inputs 26
Ground 26
Aux Out 26
Cal Out 26
Probe Compensation Terminal 27
USB Host Ports 27
Back Panel Inputs and Outputs 28
Motherboard I/O 28
USB Device Port 28
10 MHz In, 10 MHz Out 29
Trig Out 29
Aux Trig 29
Digital Channels Connector 29
Front Panel Controls (Keys and Knobs) Overview 30
Graphical User Interface Overview 31
Menu Overview 34
Setting the Oscilloscope to a Known Starting Condition 36
Starting and Stopping Waveform Acquisitions 37
Adjusting the Horizontal Time Scale and Trigger Position 38
Adjusting the horizontal scale 38
Adjusting the horizontal trigger position (delay) 39
Magnifying a part of the waveform using Zoom 39
Setting the horizontal reference point 40
Using the Horizontal Setup dialog box 40
Adjusting the Vertical Settings 41
Turning an analog channel on or off 42
Adjusting the analog channel’s vertical scale and offset 42
Turning digital channels on or off 43
Controlling digital channels 43
Setting Up Triggers 44
Setting the oscilloscope to trigger on an edge 44
Using Markers and Making a Measurement 46
Making a measurement on a waveform 46
Using quick measurements 48
Using markers 49
Moving markers using the graphical interface 50