User`s guide

Using the Oscilloscope 2
Agilent Infiniium 90000 X-Series Oscilloscopes User’s Guide 51
Controlling the Display
You can set the display to suit your preferences, such as by enabling the
touch screen or adjusting the intensity of the displayed waveform.
Enabling or disabling the touch screen
• Press the [Touch] key.
• Or, choose Setup > Display to open the Display Setup dialog box and click
the Touch Screen check box.
Clearing the waveform display
• Press the [Clear Display] key or press the Clear Display button.
The oscilloscope clears acquired waveform data from the display in
preparation for another acquisition. If the oscilloscope is in Run mode
and is receiving triggers, it will update the display as it collects new
waveform data.
Clearing the waveform display also resets averaging, infinite persistence,
color grade persistence, histograms, and the mask testing database.
Adjusting the brightness of the displayed waveform
• Turn the Intensity knob or press the Waveform Brightness button.
Figure 26 Display Control Keys and Knob
Figure 27 GUI Display Control Buttons
&OHDU
'LVSOD\
7RXFK
,QWHQVLW\
'LVSOD\
Clear the waveform
display
Change the waveform
brightness