User`s guide

50 Agilent Infiniium 90000 X-Series Oscilloscopes User’s Guide
2 Using the Oscilloscope
• To turn on Marker B, push the Position knob until the marker you want
to move appears in the pop- up dialog box.
Marker B has a dashed line pattern on the waveform display. It is
associated with the first available source on the display.
• To move a marker, turn the Position knob.
In Measurement Marker mode, the marker position cannot be changed.
Moving markers using the graphical interface
1 Turn on the markers either by pressing the [Markers] key on the front
panel or by choosing Measure > Markers.
2 Click and drag one of the markers to the position you want on the
waveform, then release.
Clicking and dragging a marker makes it easy to quickly move the
marker to the desired waveform event. You can use the front- panel
Position knob for fine adjustment, or choose the Markers command
from the Measure menu and set the marker position precisely.