User`s guide

12 Agilent Infiniium 90000 X-Series Oscilloscopes User’s Guide
1 Setting Up the Oscilloscope
Inspecting package contents
✔ Inspect the shipping container for damage.
• Keep the shipping container or cushioning material until you have
inspected the contents of the shipment for completeness and have
checked the oscilloscope mechanically and electrically.
• If the shipping container is damaged, or the cushioning materials
show signs of stress, notify the carrier and your Agilent Technologies
Sales Office. Keep the shipping materials for the carrier’s inspection.
The Agilent Technologies Sales Office will arrange for repair or
replacement at Agilent’s option without waiting for claim settlement.
✔ Inspect the oscilloscope.
If there is mechanical damage or a defect, or if the oscilloscope does
not operate properly or does not pass performance tests, notify your
Agilent Technologies Sales Office.
✔ Verify that you received the following items in the Infiniium oscilloscope
packaging.
• Infiniium oscilloscope
• Power cord
• Keyboard
• Mouse (USB optical)
• Touchscreen stylus
• Accessory pouch
• Front panel cover
• Calibration cable
• Connector saver collars (kit of 10)
• Connector assembly, 3.5mm f- f (quantity of 5)
• ESD wrist strap
• Quick Start Guide
• Digital channels cable (MSO models only)
• MSO calibrator board assembly (MSO models only)
If anything is missing, contact your nearest Agilent Technologies Sales
Office. If the shipment was damaged, or the cushioning materials show
signs of stress, contact the carrier and your Agilent Technologies Sales
Office.
✔ Verify that you received the options and accessories you ordered and
that none were damaged.
For a complete list of options and accessories available for the
90000 X- Series oscilloscopes, see the Infiniium 90000 X- Series
Oscilloscopes Data Sheet.