Specifications

Chapter 5: Replacing Assemblies
Removing and Replacing the Acquisition Boards/Backplane Assembly
97
Removing an Acquisition Board
When removing an individual acquisition board, keep in mind that acquisition
board 1 is next to the oscillator board and it has the longest cable. Acquisition
board 4 has the shortest cable. You may want to label the acquisition boards
1 through 4 for easy reference.
1 Carefully remove the five clock cables from the DRO to the acquisition boards
using a 5/16 Torx wrench. Be sure to avoid catching the cables on any acquisition
board components.
Figure 5-59
2
Remove the attenuator control cables.
Figure 5-60