Specifications

Chapter 5: Replacing Assemblies
Removing and Replacing Front Panel Assembly Parts
90
3
Remove the four M3 screws (two on each side) connecting the display to the
deck. When reinstalling, torque to 5 in- lbs.
Figure 5-44
Attenuators (20, 25, and 33 GHz Models)
1 Remove the four screws connecting each attenuator to its bracket. When
reconnecting, torque the screws to 8 in- lbs.
2 Remove the four attenuators by removing the nut of the attenuator from the
threads of the 3.5 mm connector. Remove the attenuator from the bracket. When
replacing, use a hand torque wrench to torque the nuts to 8 in- lbs.
Figure 5-45