Specifications

Chapter 5: Replacing Assemblies
Removing and Replacing Front Panel Assembly Parts
89
Cal Connector (Power Button) Assembly
1 Remove the two screws connecting the cal bracket to the front deck. When
replacing, use a power driver and T- 10 bit to torque the screws to 8 in- lbs.
Figure 5-41
2
Remove the cal connector assembly from the front panel deck. Carefully pull
the cables through the front deck. Replace individual parts as needed.
Figure 5-42
Display Assembly
1 Remove the front panel bezel and front panel assembly as described previously.
2 Disconnect the display cable from the back of the display.
Figure 5-43