Specifications

Chapter 5: Replacing Assemblies
Removing and Replacing Front Panel Assembly Parts
86
Removing and Replacing Front Panel Assembly Parts
Remove the front panel assembly as described in the previous section.
Front Panel Clutches, Connectors, and Knobs
WARNING This step will ruin the clutch. You will have to replace the clutch with a new one.
1
Use a thin item such as a ribbon to protect the oscilloscope from scratches,
and pull on the dark gray plastic clutches to pop them off of the oscilloscope.
2 Use your fingers to pull off the knobs.
Front Panel Bezel and Front Panel Assembly
1 Remove the seven M3 screws (three from each side and one from the bottom).
When replacing the screws, torque to 5 in- lbs.
Figure 5-34
2
Disconnect the orange touch screen cable.
Figure 5-35