Specifications

Chapter 5: Replacing Assemblies
Removing and Replacing the Front Panel Assembly and Bottom Panel
84
5
Gently remove the RealEdge assembly, keeping the cables from getting caught.
Gently slide it toward the back, careful to avoid catching any parts on the sheet
metal flange on the chassis.
Figure 5-31
6
Flip the RealEdge assembly over and disconnect the remaining cables: two input
cables, two attenuator cables, and the two cables coming from the 32 GHz DRO.
You do not need to disconnect the cables from the DRO itself.
Figure 5-32
7
Place the RealEdge assembly into an anti- static bag.