Specifications

Chapter 5: Replacing Assemblies

Returning the Oscilloscope to Agilent Technologies for Service

Before shipping the oscilloscope, contact Agilent Technologies, Inc. for more

details.

1 Write the following information on a tag and attach it to the oscilloscope.

• Name and address of owner

• Oscilloscope model numbers

• Oscilloscope serial numbers

• Description of the service required or failure indications

Remove all accessories from the oscilloscope.

Accessories include all cables. Do not include accessories unless they are

associated with the failure symptoms.

3 Protect the oscilloscope by wrapping it in plastic or heavy paper.

4 Pack the oscilloscope in foam or other shock- absorbing material and place it

in a strong shipping container.

You can use the original shipping materials or order materials from an Agilent

Technologies Sales Office. If neither is available, place 16 to 20 cm (6 to 8

inches) of shock- absorbing material around the oscilloscope and place it in a

box that does not allow movement during shipping.

5 Seal the shipping container securely.

6 Mark the shipping container as FRAGILE.

In any correspondence, refer to the oscilloscope by model number and full serial

number.