Specifications

Chapter 5: Replacing Assemblies
Removing and Replacing the Acquisition Boards/Backplane Assembly
100
Removing the Backplane Board from the Deck
1 Loosen the five guide pins. When replacing, torque the guide pins to 5 in- lbs
using a size 6 metric open- end wrench.
Figure 5-65
2
Using a T10 Torx, remove the 10 tie- down screws from the edges. When replacing,
torque the screws to 5 in- lbs.
Figure 5-66
3
Lift the backplane assembly off the deck.