Specifications

Table 1. Softkey Descriptions (13 of 17)
Key Name
Redraw
GraticI
SHIFT
Redraw
GraticI
Ref.
Source
Remove
Line
Repeat
Msrmnt
Results
Files
RF
Segmnts
Run Test
Select
Detect.
Select
Path
Description
Redraws the graph without noise data. Essentially
erases all plotted data from the graph.
Outputs graph to an external plotter.
Allows you to specify a reference source in the
Source Control Diagram. Accesses each RF Source
entered in the System Configuration Table and the
HP 11848A's internal sources.
Erases the slope line that the cursor is positioned on.
Initiates a measurement without performing a
measurement calibration. This should only be used
for measuring the same device or a similar device
with the same power level (±0,5 dB) at the same
frequency.
Accesses the Results File Directory. You may load or
store Results Files from this menu.
Accesses the RF Segment Tables. This special
function enables you to modify the Segment Tables
to enhance your measurement.
Initiates execution of the selected functional test.
Allows you to select one of three available phase
detector input ports of the HP 11848A from the
Define Graph display.
Allows selection of the signal path within the
HP 11848A to be characterized by the selected test.
Chapter
3 Graphics
Function
2 Meas.
Definitions
3 Graphics
Functions
2 Meas.
Definitions
3 Graphics
Functions
5 Special
Functions
HP 3048A
Calibration
Manual
2 Meas.
Definitions
HP 3048A
Calibration
Manual
16 Softkey Index