Technical data

Mure to set the ac power input to the correct voltage could cause damage to
the instrument when the ac power cable is plugged in.
Safety Symbols-l
outlet provided with the protective earth contact. Any intemption
of the protective (grounding) conductor, inside or outside the instrument, or
disconnection of the protective earth terminal can resutt in personal injury.
Warning
There are voltages at many points in the instrument which can, if contacted,
cause personal injury. Be extremely careful. Any adjjstments or service
procedures that require operation of the instrument with the protective covers
removed should be performed only by trained service personnel
Caution
BEFORE THIS INSTRUMENT IS TURNED ON, make sure its primary
power circuitry has been adapted to the voltage of the ac power source.
sue it has been
properly grounded through the protective conductor of the ac power cable to
a socket
9
BEFORE THIS INSTRUMENT IS SWITCHED ON, make
lffe. Do
not proceed beyond a WARNING sign until the indicated conditions are fully
understood and met.
Warning
correctfy performed or adhered to, could result in injury or loss of
9
The WARNING sign denotes a hazard It calls attention to a procedure which, if
not
fully understood and met.
Warning
SAFETY SYMBOLS
The following safety symbols are used throughout this manual and in the instrument.
Familiarize yourself with each of the symbols and its meaning before operating the instrument.
Note
Notes will be used to cell attention to an important point in the text.
This is not a hazard, but should not be ignored as it will provide a better
understanding of the text.
Caution
The CAUTION sign denotes a hazard. It calls attention to a procedure
which, if not correctly performed or adhered to, could result in damage to or
destruction of the instrument. Do not proceed beyond a CAUTION sign until
the indicated conditions are