Technical data

first time each
day, momentarily short the center and outer conductors of the cable together.
n Personnel should be grounded with a resistor-isolated wrist-strap before touching the
center pin of any connector and before removing any assembly from the instrument.
n Be sure that all instruments are properly earth-grounded to prevent build-up of static
charge.
General Information 1-9
Reducing ESD Damage
Handling of Electronic Components
n Perform work on these items at a static-safe work station.
n Store or transport these items in static-shielding containers.
n Use proper handling techniques.
Caution
PC board traces are easily damaged.
Do not touch traces with the bare hands.
Always handle board assemblies by the edges.
Test Equipment
n Before connecting any coaxial cable to an instrument connector for the