Specifications

5-10
Getting Started
Making Your First Measurement
To Select a Fixed Error Rate
16.Select , then choose an error rate of 1E-5. The error detector front
panel ERRORS LED will be ON and an Errors flag illuminated at the top of the
screen.
To Add External Errors
Connect an external error signal source to the pattern generator ERROR INJECT INPUT.
A single error is added to the data output for each rising edge at the input.
Start a New Measurement
17.Select
To View Measurement Results
18.Press then and view results at the end of the gating
period. A typical results display is given in the following figure.
19.The error detector (Main Results) are displayed; this is only one of seven result pages
you can select to view instrument status or configuration.
20.Try selecting each of the softkeys and view the error detector results for
each selection.
This concludes your first measurement using an Agilent 71612 Series error performance
analyzer.
ERR-ADD FIXED
RUN GATING
result pages
MAIN RESULTS
result pages