Specifications

5-4
Getting Started
To Set Up the Display
To configure the system correctly it is important to first set up the display, and then
configure the display to show instrument status. System functions are therefore split into
two groups as follows:
• Display Functions
• Instrument Functions
These functions are explained in the following paragraphs.
Display Functions
Display functions are accessed using the fixed label key. Pressing the
key provides the softkeys on the left and right of the display as shown below,
enabling display functions to be set up. Refer to the Agilent 70004A display Operation
Manual for detailed information on display operation softkeys.
Figure 5-2 Display Softkeys
DISPLAY
DISPLAY