Specifications
4-22
Operating Features and Specifications
Measurement Period
Measurement Period
The measurement period is configured from the menu accessed via
Measurement Period Features
• Length: The length of the measurement period can be set as a time period, number of
bits or number of errors.
• Timed Measurement Period: Can be set from 1 second to 99 days, 23 hours,
59 minutes 59 seconds in 1 second steps.
• Number of Bits: The time for the number of bits to be received to a resolution of
1second.Canbesetfor10nbits,n=7to15.
• Number of Errors: Time for number of errors to be detected to a resolution of
1 second. Can be set for 10, 100 or 1000 errors.
• Real-time Clock: Provides time and date information for event logging. Battery back-
up allows clock to continue running when the instrument is switched off or power fails.
• Elapsed Time Indication: Shows elapsed time from the start of a gating period; resets
to zero at the start of each gating period; holds value when measurement stopped.
Gating modes
There are three gating (measurement timing) modes: Manual, Timed Single and Timed
Repeat.
Manual: Gating period is controlled by the and
keys. Accumulating results are displayed throughout the measurement and the end of
measurement results are held until a new gating period is started.
Single: Gating period is started by pressing the key and terminates at
the end of the gating period set by the user. Accumulating results are displayed
throughout the gating period and the end of gating results are held until a new gating
period is started.
Repeat: Similar to Single but when one timed gating period ends, a new identical
period starts. This continues until the measurement is terminated by pressing the
key. The measurement results displayed during any period can be
the final results of the previous period or the accumulating results for the current
period. There is no “deadtime” between consecutive periods. The gating period
excludes any periods when the instrument is not powered.
gating
RUN GATING STOP GATING
RUN GATING
STOP GATING