Specifications

2-19

Installation

Selftest at Power-on

At power-on the error performance analyzer system performs a selftest (this takes

approximately 15 seconds to complete). During this time the display, instrument, clock

source and mainframe (option UKB instruments) operate as follows:

Display: The display is blank for the first few seconds of the selftest. It

then shows a multi-colored raster. The raster sweeps to the right,

to show a blue back-ground. For the remainder of the selftest the

display is as follows:

After selftest the display may continue to display the above, or

will display the module parameters present prior to the last power

down.

Agilent 70843: All front panel indicators are lit for approximately eight seconds

then extinguished for the remainder of the selftest.

After selftest the ACT indicator should light.

Clock Source Module: All front panel indicators are lit for approximately five seconds

then extinguished for the remainder of the selftest.