Specifications

2-17
Installation
System Installation
NOTE The other front panel ports on the Agilent 70843 pattern generator and
error detector are interconnected according to the application you want
to undertake. All the necessary cables, adapters and 50Ω terminations
are provided with your instrument. Unused ports must be terminated in
50Ω.
CAUTION Check the power cables you intend to use for damage before powering
on your system, see the Power Cables on page 2-7.
5. Connect power cables to your system then connect the cables to the power outlets.
Your system is now ready for System Verification, see page 2-18.