Specifications

Index-1
Index - Programming Manual
A
Address Configuration, HP-IB 1-5
Audio Output on Bit Errors 5-47
B
Basic, Programming Hint 4-4
C
Clock Loss Register Group 3-10
Clock Stabilization, program example 9-2
Command Language 2-2
Command Structure, SCPI 2-4, 2-5
Command Syntax, SCPI 2-5
Common Commands 6-16
Common Commands, SCPI 2-2
Connecting to the HP-IB 1-4
Control of User Pattern A to B Changeover
5-11
Coupled Parameters, SCPI 2-11
D
Definition of Input/Output Ports 6-2
Device Clear (CLEAR), HP-IB command
1-6
Device/Controller Synchronization
Techniques 2-8
E
Error Addition 5-12
Error Detector
CLOCK IN 5-29
clock input port 6-13
DATA IN 5-26
data input port 6-10
Error Location 5-34
error output port 6-13
ERRORS OUTPUT 5-30
Measurement Functions 5-36
Measurement Gating 5-32
measurement subsystem 6-14
Pattern Synchronization 5-31
Result and Configuration Logging
5-45
TRIGGER OUTPUT 5-30
trigger output port 6-13
F
Failure Status Register Group 3-11
H
Hewlett-Packard Interface Bus (HP-IB) 1-3
HP-IB
Non-HP Controllers 1-8
Required Commands 1-6
HP-IB command
Device Clear (CLEAR) 1-6
Local (LOCAL) 1-7
Local Lockout (LOCAL LOCKOUT)
1-7
Remote Enable (REMOTE) 1-7
Serial Poll (SPOLL) 1-7
I
IEEE
Common Commands 6-23
Common Commands and Queries
5-52
Mandatory Commands 5-52
Optional Commands 5-52
Input/Output Ports, Definition of 6-2
INST PRESET, hardkey 5-48, 5-53
Instrument Control Commands, SCPI 2-3
Instrument Status 5-50
Interface Types 1-3
Internal Registers 3-2
Interrupt Programming 3-17
L
Labview, Programming Hints 4-5
Local (LOCAL), HP-IB command 1-7
Local Lockout (LOCAL LOCKOUT),
HP-IB command 1-7
Local Mode 1-5
logging, hardkey 5-45