Specifications

8-5
SCPI Messages
Command Errors [-199, -100]
-123 Exponent too large
The magnitude of the exponent was larger than 32000 (see IEEE 488.2, 7.7.2.4.1).
-124 Toomanydigits
The mantissa of a decimal numeric data element contained more than 255 digits excluding
leading zeros (see IEEE 488.2, 7.7.2.4.1).
-128 Numeric data not allowed
A legal numeric data element was received, but the device does not accept one in this
position for the header.
-130 Suffix error
This error, as well as errors -131 through -139, are generated when parsing a suffix. This
particular error message should be used if the device cannot detect a more specific error.
-131 Invalid suffix
The suffix does not follow the syntax described in IEEE 488.2, 7.7.3.2, or the suffix is
inappropriate for this device.
-134 Suffix too long
The suffix contained more than 12 characters (see IEEE 488.2, 7.7.3.4).
-138 Suffix not allowed
A suffix was encountered after a numeric element which does not allow suffixes.
-140 Character data error
This error, as well as errors -141 through -149, are generated when parsing a character
data element. This particular error message should be used if the device cannot detect a
more specific error.
-141 Invalid character data
Either the character data element contains an invalid character or the particular element
received is not valid for the header.
-144 Character data too long
The character data element contains more than twelve characters (see IEEE 488.2,
7.7.1.4).
-148 Character data not allowed
A legal character data element was encountered where prohibited by the device.