Specifications

8-2
SCPI Messages
No Error
Introduction
The system-defined error/event numbers are chosen on an enumerated (“1 of N”) basis.
The SCPI defined error/event numbers and the <error description> portions of the ERRor
query response are listed here. The first error/event described in each class (for example,
-100, -200, -300, -400) is a “generic” error. In selecting the proper error/event number to
report, more specific error/event codes are preferred, and the generic error/event is used
only if the others are inappropriate.
No Error
This message indicates that the device has no errors.
0 No Error
The queue is completely empty. Every error/event in the queue has been read or the queue
was purposely cleared by power-on, *CLS, etc.