Specifications

5-31
System Command Reference Section
Error Detector Pattern Synchronization
Error Detector Pattern Synchronization
SENSe[1]:SYNchronisat ONCE|<boolean>
These commands configure the settings that control synchronization of the reference
pattern to the incoming pattern.
SENSe[1]:SYN Chronisat ON turns automatic resynchronization on.
SENSe[1]:SYNChronisat OFF turns automatic resynchronization off.
SENSe[1]:SYNChronisat ONCE initiates a resynchronization attempt.
The *RST selection is ON.
SENSe[1]:SYNChronisat:THReshold <numeric value>
This sets the threshold level of error ratio at which synchronization is deemed to be lost.
NOTE The valid values are 1E−01 through 1E−08 in decade steps.
The *RST selection is 1E−1.