Specifications

5-30
System Command Reference Section
Error Detector TRIGGER OUTPUT
Error Detector TRIGGER OUTPUT
SOURce7:TRIGger[:MODE] PATTern|DCLock
The command configures the TRIGGER OUTPUT port from the error detector to be
either clock mode - a square wave at clock rate/8 or pattern mode - a pulse synchronized to
repetitions of the pattern.
The *RST selection is PAT (pattern).
Error Detector ERRORS OUTPUT
OUTPut8:PLENgth RZ|STRetched
This node configures the length of the pulse from the error detector ERRORS OUTPUT
port. The pulse length can be RZ or stretched 200 ns.
The *RST selection is RZ.