Specifications

Index-11
Index - Operating Manual
Softkey Menu 7-16
trigger & setup, hardkey 5-8, 7-16, 9-2,
11-4, 11-18, 11-19
trigger & setup, softkey 7-16
trigger 1 sec*, softkey 7-39
TRIGGER 1 SEC, softkey 7-28
trigger 1 sec, softkey 10-5
Trigger Bit 8-20
TRIGGER END PRD, softkey 7-28
trigger end prd, softkey 7-39, 10-6
Trigger Output 4-9, 7-16, 7-17
TRIGGER THRSHLD*, softkey 7-39
TRIGGER THRSHLD, softkey 7-28, 10-5
Troubleshooting 13-1–13-10
Troubleshooting Entry Chart 13-2
Type of Pattern 8-20
U
Unable to write to disk 8-17
UNAVAIL (%), softkey 7-31
Update Control Processor Firmware 1-13
update frmware, softkey 1-13, 7-19
Update Measurement Processor Firmware
1-14
Update the Agilent 70843 Firmware 1-13
UPDATE YES, softkey 1-14
UPDATE, softkey 1-13
Updating Firmware 1-2
UpdCntlAppl, softkey 1-13, 7-19
UpdMeasAppl, softkey 1-14, 7-19
Upgrade Options 1-8
User Pattern Creation 8-6–8-15
User Pattern Default Settings 9-11
User Pattern Memory 4-4, 8-5
User Patterns 8-1–8-20
User's Page 7-24
USER, hardkey 1-13, 7-2, 7-3
USER’S PAGE, softkey 4-25, 4-26, 7-25
User-programmable test patterns 4-4, 8-1–
8-20, B-3
Using the Agilent 70004A Display 5-2
USR, softkey 5-11, 7-10, 8-13, 10-6, 11-24
V
Verify Capture Error 5-11
Verify/Demonstrate the Capture Error
Feature 11-24
Viewing Results 5-9
Volt/Temp Troubleshooting 13-5
VOLTAGE CENTER, softkey 7-31
W
Warm-up 4-2
When Measurement Results can be Logged
10-4
Y
yellow softkeys 5-3, 7-2
YES, softkey 5-11, 8-13, 11-24
Z
zero sub, softkey 7-4, 8-9
Zero Substitution/Variable Mark Density
4-3
ZerosubMenuMap6-4