Specifications
Index-9
Index - Operating Manual
Physical Specifications 2-5
Power Cables 2-7
POWER LOSS s, softkey 7-30
Power Loss Seconds A-3
Power Requirements 2-6
Power-loss Seconds 4-19
PRBS Menu Map 6-4
PRBS Test Patterns 4-3
PRBS, softkey 11-18
prbs, softkey 7-4
Precautions 1-2, 1-11
Preparation for Use 2-2, 2-3
Preparing an Instrument for Shipping 1-10
PRESET 0 Settings 9-3
Preset 1 Configuration 9-8
PRESET 1 Settings 9-8
Preset 1, softkey 5-8, 9-2
Preset 2 Configuration 9-10
PRESET 2 Settings 9-10
Preset 2, softkey 5-8, 9-2
PRESET Instrument Configurations 9-2
PREV SCREEN, softkey 7-7, 8-7, 8-15
Primary Softkeys 7-3
Printer Address 10-3
Printer Interface Cables 10-3
Printers, recommended 10-2
Procedure, First Measurement 5-7
Procedure, installation 2-16
R
Rack Mount Installation 2-13
Ram User Menu Map 6-5
ram Usr pattern, softkey 7-5, 8-9, 8-10,
8-13, 9-11
ram Usr, softkey 8-15
ram, softkey 8-10
RAM-Based File Catalog 8-4
Rear Panel Switches 4-12
recall setup, softkey 5-8, 7-18, 9-2
Recommended Accessory List 1-8
Recommended Printers 10-2
REPEAT, softkey 7-35
REPLACE, softkey 5-11, 7-7, 11-24
REPORT ERRORS, softkey 13-8
REPORT PREVCUR, softkey 7-36
Residual Error Rate Test 11-23
Result Logging 4-20
Result Pages Menu 7-22
result pages, hardkey 4-17, 4-21, 4-25,
4-26, 5-8, 5-10, 6-3, 7-22, 7-25, 7-33
result pages, softkey 7-22
Results Storage 10-8
Returning Instruments for Service 1-2, 1-9
Revision Code 8-19
RUN GATING, hardkey 2-18, 4-16, 4-22,
5-9, 5-10
RUN GATING, softkey 7-35
Running out of Disk Space 8-16
RZ, softkey 11-19
S
S/R CLK AMPLTD, softkey 7-26
S/R CLK HI-LEVL, softkey 7-27
S/R CLK TERM, softkey 7-27
S/R DAT AMPLTD, softkey 7-15, 7-26
S/R DAT ECL, softkey 7-15, 7-16
S/R DAT HI-LEVL, softkey 7-15, 7-16,
7-26
S/R DAT TERM, softkey 7-26
Safety Considerations 1-2
Safety Information 1-2
Safety Symbols 1-4
Save a Block of Data 8-11
Save a Pattern 8-8
Save and Recall Instrument Setup 7-18
save pattern, softkey 5-11, 7-7, 8-5, 8-8,
8-10, 8-15, 8-16, 11-24
save setup, softkey 7-18
save to ram, softkey 8-12
save, softkey 7-8
savedel block, softkey 7-8, 8-11
savedel, softkey 7-8
SCPI (Standard Commands for
Programmable Instruments) 12-2
SECONDS, softkey 5-9
Select a Measurement Gating Period 5-9