Specifications

1-2
General Information
Introduction
Introduction
This chapter contains general information about the Agilent 71612 Series System and is
divided into the following sections:
Safety Considerations General Safety Information, Safety Symbols
Options Lists all the options available with your system.
Accessories Supplied Lists the accessories supplied with your system.
Serial Number Information Explains the Agilent Technologies serial numbering
system.
Returning Instruments for Service Contains information on how to return an instrument
to Agilent Technologies for service.
Precautions Highlights electrostatic discharge procedures and
accessories available. This section also contains
information on lifting or carrying the Agilent 70843
andoncleaningthedisplay.
Updating Firmware Provides a procedure for updating the Agilent 70843
firmware.
Safety Considerations
This product is a Safety Class 1 instrument (provided with a protective earth terminal).
The instrument and manual should be reviewed for safety markings and instructions
before operation. Also read the Warnings page at the front of this manual
Safety Information
The following general safety precautions must be observed during all phases of operation,
service, and repair of this instrument. Failure to comply with these precautions or with
specific warnings elsewhere in this manual violates safety standards of design,
manufacture, and intended use of the instrument. Agilent Technologies Company assumes
no liability for the customer's failure to comply with these requirements.