Specifications

11-27
Performance Tests
Error Detector Performance Tests
Gating Input & Error Measurement
1. Press the key. Switch the hardkey to .
2. Select , .
3. Select error rates from 1E−3to1E−9 inclusive and verify that the correct error rate is
displayed.
Error Out
1. With the equipment set up as in Figure 11-15, select a fixed error rate of 1E−3.
Figure 11-15
2. Press . Select and set to
.
3. The reading on the frequency counter should be 1 x 10
6
.
sync & audio AUDIO ON/OFF OFF
error add
ERR-ADD FIXED
INSTR PRESETUP
trigger & setup
ERR O/P RZ200ns
RZ