Specifications

9-2
Preset Instrument Configurations
Introduction
Introduction
This chapter lists the default settings for the three pre-defined PRESET instrument
configurations and the four user PATTERNS.
They are accessed according to the following rules:
PRESET 0 is used following:
• A press of the key
• An GPIB command “ *RST ”
• An GPIB command “ SYSTem:PRESet ” or “ SYSTem:PRESet0 ”
• Power-on after installing new firmware
• Power-on with a different configuration of modules
PRESET 1 is used following:
• A press of the , , keys
• An GPIB command “ SYSTem:PRESet1 ”
PRESET 2 is used following:
• A press of the , , keys
• An GPIB command “ SYSTem:PRESet2 ”
PRESET Instrument Configurations
Table 9-1 lists the Agilent 70843 PRESET 0 configuration and Tables 9-2 and 9-3 list the
PRESET 1 and PRESET 2 configurations, respectively.
INST PRESET
trigger & setup
recall setup Preset 1
trigger & setup
recall setup Preset 2