Specifications

8-8
User Patterns and Disk Operation
How to Set Up and Edit Your Own User Pattern
To Save a Pattern
When you have finished editing a pattern it must then be saved to a pattern store. This can
be to a disk store or one of the four internal pattern stores. Use the following procedure to
save an edited pattern to any pattern store.
Procedure
1. Press the softkey. The display will change to show the RAM-based
file catalog. Use the softkey to switch between each file catalog display, an
example is shown in the following figure.
2. Select the softkey indicating the pattern store into which you wish to store the edited
pattern.
To Load a Pattern Store Into the Editor
The following procedure explains how to load the contents of a pattern store (INTERNL
or DISK) into the editor when the user is not currently working in the editor.
Procedure
Use this procedure if you are not currently working in the editor.
1. Select the hardkey.
2. Press or then select an
or .
The pattern store selected is now displayed and you can edit that pattern using the
softkeys. The following two procedures explain how to load a PRBS or user pattern into
the editor.
save pattern
toggle
pattern
edit ram usr edit diskUsr
INTERNL PATT 1 to 4 DISK PATT 5 to 12