Specifications

7-27
Softkey Menu Descriptions
Build User-Page Menu
Displays the subrate clock Hi-level value.
Displays the subrate clock termination selection (0V or −2V).
Displays the current error add mode selection (SINGLE,
EXTERNAL FIXED or OFF).
Input & Sync USER'S PAGE menu
Displays the selected 0/1 threshold setting (AUTO or MAN).
Displays the selected data input polarity (normal or inverted).
Displays the clock to data input delay.
Displays the data input termination (0V or −2V).
Displays the clock input termination (0V or −2V).
Displays the eye edge threshold value.
Displays the selected sync mode (AUTO or MANUAL).
Displays the selected sync threshold.
Indicates whether AUDIO SYNCLS is ON or OFF.
Gating Err-loc USER'S PAGE menu
Displays selected gating mode (MANUAL, SINGLE or
REPEAT).
Displays selected gating duration (TIME, ERRS or BITS).
Displays selected gating period.
Displays results from the PREVIOUS or CURRENT gating
interval.
Displays the block start address for Block BER measurements.
Displays block length selected for Block BER measurement.
Displays the bit error address for error location measurements.
Logging USER'S PAGE menu
Indicates whether the instrument is set to log to an external
controller or an GP-IB printer.
Indicates whether LOGGING is ON or OFF.
S/R CLK HI-LEVL
S/R CLK TERM
ERROR ADD
0/1 THRSHLD
DAT I/P POLRITY
DAT I/P DELAY
DAT I/P TERM
CLK I/P TERM
EYE THRSHLD
SYNC MODE
SYNC THRSHLD
AUDIO SYNCLS
GATING RPT MOD
GATING DUR MOD
GATING PERIOD
GATING REPORT
BLOCK START
BLOCK LENGTH
BIT ERR ADDRESS
LOGGING DEVICE
LOGGING STATUS