Specifications

7-26
Softkey Menu Descriptions
Build User-Page Menu
Pattern & Trigger USER'S PAGE menu
Displays the pattern currently selected.
Displays the selected pattern generator trigger mode (clock/8,
clock/32 or pattern).
Displays the current trigger bit pattern. For a pure PRBS the
trigger bit pattern length is 7, 10, 15, 23 or 31 depending on the
setting of the pure PRBS. For a user pattern, zerosub or markden
pattern the position of the trigger bit is displayed.
Displays the selected error detector trigger mode (clock/32 or
pattern).
Displays the format of error output pulses (RZ or stretched).
Data & Clock Output USER'S PAGE menus
Displays the main clock output amplitude.
Displays the main clock output Hi-level.
Displays the main clock output termination (0V or −2V).
Displays the main data output amplitude
Displays the main data output Hi-level value.
Displays the main data output termination.
Displays the main data output CONTROL (ON or OFF).
Displays the main data output polarity (normal or inverted).
Displays the clock to data output delay.
Displays the “tracking” configuration state which determines
whether the Amplitude and High-level controls for data follow
those of the data output or are independent.
Displays the cross-over settings for data and data.
Err-add Subrate USER'S PAGE menu
Displays the subrate date amplitude.
Displays the subrate data Hi-level value.
Displays the subrate data termination selection (0V or −2V).
Displays the subrate clock amplitude.
pattern
PG TRIG MODE
PG TRIGGER
ED TRIG MODE
ED ERR OUTPUT
CLK O/P AMPLTD
CLK O/P HI-LEVL
CLK O/P TERM
DAT O/P AMPLTD
DAT O/P HI-LEVL
DAT O/P TERM
DAT O/P CONTROL
DAT O/P POLRITY
DAT O/P DELAY
DATA/ TRACK
DATA X-OVER
S/R DAT AMPLTD
S/R DAT HI-LEVL
S/R DAT TERM
S/R CLK AMPLTD