Specifications

7-7
Softkey Menu Descriptions
Pattern Softkey Menus
Editor softkeys are as follows:
Switches the edit mode between or .
Position the cursor on the point in the pattern to be changed, then
use the numeric keypad (1 and 0) keys to insert or replace bits.
Youcanusethe keytoallocateafullsize
window to the pattern.
If the Pattern length is greater than 576 it is split between two or
more screens. Where this is the case the and
softkeys enable the user to skip between
screens to examine or edit the pattern.
Deletes the bit highlighted by the cursor.
Enables the user to quickly position the cursor on any bit in the
pattern.
Enables the user to store the contents of the user pattern memory
to a pattern store. The label, pattern type and binary contents of
the user pattern memory are all saved.
Switches the display between allocating a full screen to the
pattern editor and the standard display of 2/3 error detector and
1/3 pattern generator.
Pressing this key produces a sub-menu of softkeys, which enable
the user to load a fixed PRBS of 2^7, 2^10, 2^11 or 2^13, or a
user pattern into the user pattern memory at the current cursor
position. The current setting of the softkey
controls how the pattern is loaded. See Chapter 8 for more
detailed information on .
INSERT REPLACE INSERT REPLACE
toggle screen
PREV SCREEN
NEXT SCREEN PREV SCREEN
NEXT SCREEN
DELETE BIT
goto bit
save pattern
toggle screen
load block
INSERT REPLACE
load block