Specifications

8
Press
Main/Delayed
, then press the
Main
softkey.
9
Use the horizontal vernier to change the time base to 7
µ
s/div, then
center the signal on the display with the delay knob (delay about
989
µ
s).
Full screen display of the IRE
Delay in TV line units hint
HP 54600B-series oscilloscopes with system ROM versions 2.1 and greater have
the ability to display delay in TV-line units. Using the TV field trigger mode
activates this line-counting feature. When Field 1 or Field 2 is selected as the
trigger source, delay can be set in terms of time or line number.
Figure 2–29
Operating Your Oscilloscope
To analyze video waveforms
2–40