Specifications

3
Using the position knob, move the trace up and down about one
division.
Notice that the last acquired waveform is in full bright and the previously
acquired waveforms are displayed in half bright.
•
To characterize the waveforms, use the cursors. See "To make cursor
measurements" on page 2–22.
•
To clear the display, press
Erase
.
•
To exit the Autostore mode, press either
Run
or
Autostore
.
Summary of storage keys
Run – The oscilloscope acquires data and displays the most recent trace.
Stop – The display is frozen.
Autostore – The oscilloscope acquires data, displaying the most recent trace in
full bright and previously acquired waveforms in half bright.
Erase – Clears the display.
Operating Your Oscilloscope
To use storage oscilloscope operation
2–7