User guide

5
2-35 Nibble out the third from the top ½” by ⅛” card cage bar on the side of the A3A4
card cage facing the CRT to make a routing path for the A3A4 W2 cable. File
smooth any sharp edges caused by the nibbling (figure 2).
2-36 Replace the A3 card cage and all its cards except for the old A3A4 card.
2-37 Plug the 12” RJ-45 cable (W2 included in the kit) into the TEP A3A4 board from
the kit and install the TEP A3A4 board into the A3A4 card cage slot, working the
W2 cable slack out through the nibbled cutout hole.
2-38 Replace the A3 card cage top cover.
2-39 Reconnect the three SMB cables that are connected through the top cover of the
A3 card cage.
Figure 2: Modified A3 Card Cage