Specifications

4 Set up the Waveform menu.
a Press the Waveform key.
b Move the cursor to the sec/Div field, then use the RPG knob to dial in 100 ns.
c Select the Markers Off field, then select Pattern.
d Select the Specify Patterns field. Select X entering 1 and O entering 1.
e Select Done to exit the Specify Patterns menu.
f Move the cursor to the X-pat field. Type 1, then press Done.
g Move the cursor to the O-pat field. Type 1901, then press Done.
h Select the Markers Patterns field, then select Statistics. Select Reset Statistics to
initialize the statistics fields.
Testing Performance
To test the time interval accuracy (logic analyzer)
3–63