Specifications

d Adjust the pulse generator channel 2 Delay until the pulses are aligned according the
the setup time of the setup/hold combination selected, +0.0 ps or -100 ps.
3
Select the clock to be tested.
a Select the clock field to be tested, then select the clock as indicated in the table. The
first time through this test, use the top multiple-edge clock in the following table.
Clocks
J↕
K↕
L↕
M↕
N↕
P↕
b Connect the clock to be tested to the pulse generator channel 2 output.
c Select Done to exit the Master Clock menu.
Testing Performance
To test the single-clock, multiple-edge, state acquisition (logic analyzer)
3–57